HB0035
HIGH DENSITY POLYETHYLENE

General Informations:
HB0035 is a high molecular weight high density polyethylene blow moulding grade combining blow moulding extrusion behavior and superior mechanical properties. Blow moulded items made from HB 0035 exhibit high impact strength and good stress cracking resistance and high stiffness . HB 0035 contains antioxidant to protect the polymer from degradation during processing .
HB 0035 is a highly crystalline , non-polar thermoplastic and has excellent chemical resistance and superb impact resistance at ambient conditions and even at cold temperatures.

Applications:
HB0035 is well suited for wide range of blow moulding applications due to its unique properties. These range from bottles for bleach , motor oil , toiletries , mild and distilled water. This grade is also used to make small containers(frome 10 cc to 20 lit.).

 The above data are typical laboratory average . They are intended to serve as guides only.
 
HB0035
HIGH DENSITY POLYETHYLENE
 
Processing Conditions :
HB0035 can be processed in most types of blow moulding equipment including HDPE or LDPE extruders . It is suitable for producing hollow article in extrusion blow moulding process .
A single screw extruder with a barrel of 25D to 30D long , smooth walled grooved feed section and/ or with decompression , mixing and shearing sections with 20D to 25Dscrew length are typical extruders for blow moulding of containers . This arrangement minimizes thermal degradation of melt and provides a high plasticizing capacity coupled with good extrudate quality.
 
Storage:
The product should be stored in dry conditions at temperature below 60oC and protected from UV light.
Improper storage can initiate degradation with resulting odor generation and colour changes.
 
Health & Enviroment:
HB0035 is not calssified as a dangerous product.Dust and fines from the product may give a risk for dust explosion. All equipment should be properly grounded. Inhalation of dust may irritate the respiratory system and should be avoided.
During processing of the product small amounts of fumes are generated which require proper ventilation.
 
Recycling:
End products made from this polymer are recyclable for other applications, using modern methods of shredding and cleaning,only if approved in the relevant standard or specification. In-house production waste should be kept clean to facilitate direct recycling.
Dumping and landfilling is also possible in agreement with the competent authorities.
 
Food Contact:
The composition of products complies with the EC Directive 90/128/EEC for use in food contact application.

Packaging:
This product is packed in 25 Kg PE bags.
 
HD-5218EA
HIGH DENSITY POLYETHYLENE
 
General Informations:
HD5218EA is an easy flowing high density polyethylene copolymer grade with a narrow molecular weight distribution,suitable for thin wall injection moulding applications.
HD5218 EA has following characteristics :
*Good flowability
*High quality seal for food containers
*Suitable for fast cycling applications
 
Applications:
-Housewares
-Thin walled food containers
-“PET”bottle base cup

The above data are typical laboratory average . They are intended to serve as guides only.

HD-5218 EA
HIGH DENSITY POLYETHYLENE
 
Storage:
HD5218EA should be stored in dry and dust free environment at temperature below 50oC. Exposure to direct sun light should be avoided as this may lead to product deterioration.
 
Recycling & Environment :
End products made from this polymer can be recycled , incinerated or disposed of in landfill without detriment to the environment.With recycling , clean waste can be re-used for many less demanded applications .
Alternatively , with properly controlled and efficient incineration , preferably linked to heat or other energy recovery system, polyethylene’s high calorific value will assist the combustion of municipal solid waste .
In landfill sites HD5218EA does not degrade to produce voids , and does not emit dangerous
 gases or contribute to ground water pollution .
If pigments or other additives are incorporated into this product at the processing stage, the above statements may not be fully valid .
 
Food Contact:
The composition of products complies with the EC Directive 90/128/EEC for use in food contact application.
 
Packaging:
This product is packed in 25 Kg PE bags.
 
HD5620EA
HIGH DENSITY POLYETHYLENE
 
General Informations:
HD5620EA is a high density polyethylene grade with a narrow molecular weight distribution,suitable for thin wall injection moulding applications.This grade has following

characteristics :
-High flowability
-High warpage resistance
-Suitable for fast cycling applications
 
Applications:
-House ware
-Toyes
-Thin walled containers etc

The above data are typical laboratory average . They are intended to serve as guides only

HD5620EA
HIGH DENSITY POLYETHYLENE
 
Storage:
HD5620EA should be stored in dry and dust free environment at temperature below 50oC.Exposure to direct sunlight should be avoided as this may lead to product deterioration.
 
Recycling & Environment :
End products made from this polymer can be recycled, incinerated or disposed of in landfill without detriment to the environment.With recycling , clean waste can be re-used for many less demanded applications .
Alternatively , with properly controlled and efficient incineration , preferably linked to heat or other energy recovery system, polyethylene’s high calorific value will assist the combustion of municipal solid waste .
In landfill sites HD 5620 EA does not degrade to produce voids , and does not emit dangerous
 gases or contribute to ground water pollution .
If pigments or other additives are incorporated into this product at the processing stage, the above statements may not be fully valid .
 
Food Contact :
The composition of products complies with the EC Directive 90/128/EEC for use in food contact application.
 
Packaging:
This product is packed in 25 Kg PE bags.
 
HD6070EA
HIGH DENSITY POLYETHYLENE
 
General Informations:
HD6070EA is a high density polyethylene with a narrow molecular weight distribution. It is suitable for a wide range of injection moulding applications. This grade has following characteristics:
-Easy processing
-High rigidity
-Good impact strength
-High warpage resistance
 
Applications:
-Crates
-Boxes
-Seats

The above data are typical laboratory average . They are intended to serve as guides only.
 
 HD6070EA
HIGH DENSITY POLYETHYLENE
 
 
Storage:
HD6070EA should be stored in dry and dust free environment at temperature below 50oC.Exposure to direct sunlight should be avoided as this may lead to product deterioration.
 
Recycling & Environment :
End products made from this polymer can be recycled, incinerated or disposed of in landfill without detriment to the environment .With recycling , clean waste can be re-used for many less demanded applications .
Alternatively , with properly controlled and efficient incineration , preferably linked to heat or other energy recovery system polyethylene’s high calorific value will assist the combustion of municipal solid waste .
In landfill sites HD6070EA does not degrade to produce voids , and does not emit dangerous
 gases or contribute to ground water pollution .
If pigments or other additives are incorporated into this product at the processing stage, the above statements may not be fully valid .
 
Food Contact:
The composition of products complies with the EC Directive 90/128/EEC for use in food contact applications.
 
Packaging:
This product is packed in 25 Kg PE bags.
 
MD-3840UA
MEDIUM DENSITY POLYETHYLENE
 
General Informations:
MD3840UA is a linear medium density polyethylene (MDPE) with butene copolymer. This polymer has narrow molecular weight distribution. MD3840UA is used as a rotational molding grade.This product has following characteristics:
*Good impact strength
*Excellent external and internal surface finish
*Whiteness
*Good stress cracking resistance
*UV stabilized
 
Applications:
*Rotational moulded items with good stiffness
*Septic tanks
*Ordinary containers

 The above data are typical laboratory average . They are intended to serve as guides only.
 
MD-3840UA
MEDIUM DENSITY POLYETHYLENE
 
Storage:
MD3840UA should be stored in dry and dust free environment at temperature below 50 oC. Exposure to direct sun light should be avoided as this may lead to product deterioration.
 
Recycling & Environment :
End products made from this polymer can be recycled , incinerated or disposed of in landfill without detriment to the environment.With recycling , clean waste can be re-used for many less demanded applications.
Alternatively , with properly controlled and efficient incineration , preferably linked to heat or other energy recovery system, polyethylene’s high calorific value will assist the combustion of municipal solid waste .
In landfill sites MD3840UA does not degrade to produce voids , and does not emit dangerous gases or contribute to ground water pollution .
If pigments or other additives are incorporated into this product at the processing stage, the above statements may not be fully valid .
 
Food Contact:
The composition of products complies with the EC Directive 90/128/EEC for use in food contact applications.
 
Packaging:
This product is packed in 25 Kg PE bags.